|Hood Louvre Issue
|Page 1 of 1|
|Author:||asby69 [ Thu Oct 22, 2015 9:54 pm ]|
|Post subject:||Hood Louvre Issue|
So, I've troubleshot everything that is in the shop manual... no luck.
I've replaced the relay, the ECM, and have tested the solenoid. Still will not open a WOT.
I checked for continuity from the orange wire that goes in to the relay to the #7 pin connector that goes into the ECM. It has continuity (hence it should transmit electric signal to the relay.
I can pop the cover off the relay and manually move the contact and the louvre will open and close. I suppose that means the wiring to the solenoid and the solenoid itself is good.
|Page 1 of 1||All times are UTC - 5 hours|
|Powered by phpBB® Forum Software © phpBB Group